Raptor Series
High-speed 3D Ground Penetrating Radar Array
Raptor is a next-generation high-speed 3D-GPR array that enables very fast collection of 3D GPR data, at speeds in excess of 130 km/h (80 miles/hour), at 5 cm spot intervals. Raptor is capable of measuring speeds that eliminate the need for traffic control and security vehicles. Conventional systems typically operate at no more than 30 km/h, with similar configurations.
GPR
Raptor Series
The Raptor GPR is arguably the best 3D GPR array available today.
Raptor-45 - 450 MHz Frequency
Raptor-45 has a center frequency of 450 MHz. Arrays configured with Raptor 45 units are suitable for utility mapping, archaeological investigations, and railway investigations, among other applications.
Raptor-80 - 800 MHz frequency
Raptor-80 has a central frequency of 800 MHz and is therefore suitable for applications where higher resolutions are required. pavement layers, concrete scanning etc.
Guide Wheel for the Raptor 45
Designed to be manually pushed around the survey area, allowing for the arrangement of up to 8 channels with a total width of 0.9m. The handle assembly is fully collapsible to reduce physical space, making transport and storage much more efficient. The entire assembly can be easily moved from site to site and can even fit into the boot of a standard family car or van.
Raptor 3D GPR Software
Software designed for the Raptor 3D High-Speed Ground Penetrating Radar Array
Condor: 3D GPR processing and interpretation software
Condor is a modern processing, visualization and interpretation software for the efficient management of Raptor 3D GPR array data.
The data manager allows for practical and intuitive organization of information. The user has full control of the views and results of the various processing stages, while the layer manager offers the same for interpretation procedures.
The data manager allows for practical and intuitive organization of information. The user has full control of the views and results of the various processing stages, while the layer manager offers the same for interpretation procedures.
Talon-2: Data Acquisition and Control Software
The modular design plug and play configuration makes it easy to design any number of channels from a minimum of 4 to a maximum of 30, or custom user-defined solutions. This allows you to tailor your own array layout and support solution to meet your specific needs.
Talon's acquisition and control software offers a simple yet effective way to manage the quality of data collection and external positioning data.
Talon's acquisition and control software offers a simple yet effective way to manage the quality of data collection and external positioning data.
ViewR - Windows Viewer Software
ImpuseRadar ViewR is a new Windows-based software utility that allows users to quickly and easily open and view Raptor data files in an interpolated top-down view format without importing them into Condor (3D GPR processing and interpretation software).
The ability to review a Raptor project in this manner allows you to verify the quality and integrity of your project data while still on-site. This approach will allow you to identify potential issues with the quality of critical positioning data before leaving the project site, potentially saving costly return visits or retakes.
The ability to review a Raptor project in this manner allows you to verify the quality and integrity of your project data while still on-site. This approach will allow you to identify potential issues with the quality of critical positioning data before leaving the project site, potentially saving costly return visits or retakes.
3D GPR Data
Collection | Interpolation | Processing | Migration | Interpretation
Data collection with modern 3D GPR - Raptor data geometry cleanup and quality control - GPR data interpolation and positioning correction - Raptor 3D GPR data processing - Efficient 3D migration of Raptor GPR data - Raptor data interpretation
